Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 670

show ipsec sa
-> show ipsec sa telnet-in-esp
Name = telnet-in-esp
Type = ESP
Source = 2001:db8::/48
Destination = 2001:db8:1::24
SPI = 8920
Encryption = aes-cbc(128)
Authentication = hmac-sha1
State = active
Description:
Security association for traffic from 2001:db8::/48 to
2001:db8:1::24.
output definitions
Name
Type
Source
Destination
SPI
Encryption
Authentication
State
Description
Release History
Release 7.1.1; command introduced.
Related Commands
ipsec sa
MIB Objects
AlaIPsecSAConfigTable
alaIPsecSAConfigName
alaIPsecSAConfigType
alaIPsecSAConfigSource
alaIPsecSAConfigSourceType
alaIPsecSAConfigDestination
alaIPsecSAConfigDestinationType
alaIPsecSAConfigSPI
alaIPsecSAConfigOperationalState
alaIPsecSAConfigEncryptionAlgorithm
alaIPsecSAConfigEncryptionKeyLength
alaIPsecSAConfigAuthenticationAlgorithm
alaIPsecSAConfigAuthenticationKeyLength
alaIPsecSAConfigDescription
page 12-16
The SA name.
The SA type: AH or ESP.
The traffic source for this SA.
The traffic destination for this SA.
The SA's SPI.
The encryption algorithm used for this SA.
The authentication algorithm used for this SA.
The operational state of this SA.
The SA's description.
Adds, modifies, or deletes a manually configured IPsec Security
Association (SA).
OmniSwitch CLI Reference Guide
IPsec commands
March 2011