Icmp Type - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

icmp type

icmp type
Enables or disables a specific type of ICMP message, and sets the minimum packet gap. The minimum
packet gap is the number of microseconds that must pass between ICMP messages of the same type.
icmp type type code code {{enable | disable} | min-pkt-gap gap}
Syntax Definitions
type
code
enable
disable
gap
Defaults
parameter
enable | disable
gap
Platforms Supported
OmniSwitch 10K
page 10-76
The ICMP packet type. This is conjunction with the ICMP code deter-
mines the type of ICMP message being specified.
The ICMP code type. This is conjunction with the ICMP type deter-
mines the type of ICMP message being specified.
Enables the specified ICMP message.
Disables the specified ICMP message.
The number of microseconds required between ICMP messages of this
type.
default
disabled
0
OmniSwitch CLI Reference Guide
IP Commands
March 2011