Ip Route-Map Set Ip-Nexthop - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IP Commands

ip route-map set ip-nexthop

Configures the IP address of the next hop in a route map.
ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address
no ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address
Syntax Definitions
route-map-name
number
ip_address
Defaults
parameter
number
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete the set ip-nexthop parameter in the route map.
•
All route maps having the same name but different sequence numbers are linked together and
processed in order of increasing sequence number.
•
The route-map-name and sequence-number must exist before you configure this set criteria.
Examples
-> ip route-map 222 sequence-number 50 set ip-nexthop 128.251.17.224
-> no ip route-map 222 sequence-number 50 set ip-nexthop 128.251.17.224
Release History
Release 7.1.1; command introduced
OmniSwitch CLI Reference Guide
The name of the route map.
A number that links together the route maps. The range is 1–100.
IP address of the next hop.
default
50
March 2011
ip route-map set ip-nexthop
page 10-63