Show Multi-Chassis Vf-Link - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show multi-chassis vf-link

show multi-chassis vf-link
Displays a summary of the configured and operational parameters related to the virtual fabric link on the
switch.
show multi-chassis vf-link
Syntax Definitions
NA
Defaults
NA
Platforms Supported
OmniSwitch 10K
Usage Guidelines
NA
Examples
-> show multi-chassis vf-link
VFLink ID Oper
----------+--------+--------------+-------------+-------------+---------
0 Up
Output fields are defined here:
output definitions
VFLink ID
Oper
Primary Port
Config Port
Active Port
Def Vlan
page 7-26
Primary Port Config Port
1/2 4
Virtual Fabric Link identifier. Currently a single virtual fabric link with
identifier equalt to zero is supported.
The current status of the Virtual Fabric Link, which can be
Disabled, Down or Up.The Disabled state occurs whenever the multi-
chassis feature is disabled because the operational chassis identifier
currenty effective is the standalone chassis identifier, i.e. zero.
Identifies the primary port of the virtual fabric link. This concept is rel-
evant because all the non-unicast traffic (i.e. broadcast, multicast and
unknown unicast) is distributed across ports of the network interface
module that hosts the virtual fabric link's primary port.
Number of physcal ports configured as virtual fabric link member ports
in the range [0 - 8].
Number of physcial ports that are operational or active members of the
virtual fabric link in the range [0 - 8].
Default VLAN on the virtual fabric link within the range [1 - 4094].
Multi-Chassis Commands
Active Port Def Vlan
4 5
OmniSwitch CLI Reference Guide March 2011