Configuring UDLD
Verifying the UDLD Configuration
To display UDLD configuration and statistics information, use the show commands listed below:
show udld configuration
show udld configuration port
show udld statistics port
show udld neighbor port
show udld status port
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show udld configuration port and show udld statistics
port commands is also given in
OmniSwitch AOS Release 6 Network Configuration Guide
Displays the global status of UDLD configuration.
Displays the configuration information for all UDLD ports or for
a particular UDLD port on the switch.
Displays the UDLD statistics for a specific port.
Displays the UDLD neighbor ports.
Displays the UDLD status for all ports or for a specific port.
"Quick Steps for Configuring UDLD" on page
September 2009
Verifying the UDLD Configuration
17-3.
page 17-9