Multi-Chassis Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

7 Multi-Chassis Commands

Multi-Chassis Virtual-Fabric Aggregation (MC-VFA) enables dual homing of any standards based edge
switches to two or more aggregation switches without running the Spanning Tree protocols between the
edge and aggregation devices. The feature operates in a mode whereby all ports that are members of the
multi-chassis aggregates are actively forwarding traffic. The overall system provides fast fail-over with a
bound convergence time for all cases when edge uplinks fail.
MIB information for the Multi-Chassis commands is as follows:
Filename: ALCATEL-IND1-MULTI-CHASSIS-MIB.mib
Module: alcatelIND1MultiChassisMIB
A summary of available commands is listed here:
multi-chassis chassis-id
multi-chassis chassis-id hello-interval ipc-vlan
multi-chassis hello-interval
multi-chassis ipc-vlan
multi-chassis loop-detection
multi-chassis loop-detection transmit-interval
multi-chassis vf-link create
multi-chassis vf-link member-port
multi-chassis vf-link default-vlan
multi-chassis vip-vlan
show multi-chassis status
show multi-chassis loop-detection
show multi-chassis vf-link
show multi-chassis vf-link member-port
show multi-chassis consistency
show multi-chassis consistency linkagg
clear multi-chassis loop-detection
OmniSwitch CLI Reference Guide March 2011 page 7-1