802.1AB Commands
show lldp statistics
Displays per port statistics.
show lldp [port slot/port [-port ] slot slot] statistics
Syntax Definitions
slot/port
slot
Defaults
By default, a list of all lldp ports is displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If the slot/port option is not specified, statistics for the chassis is displayed.
•
If the statistics are zero they are not displayed.
Examples
-> show lldp statistics
----------+--------------------------------------+---------------------+----------
|
Slot/Port|
Tx
----------+--------+----------+----------+----------+----------+----------+-----
1/23
52
2/47
50
2/48
50
output definitions
Slot/Port
LLDPDU Tx
LLDPDU Rx
LLDPDU Errors
LLDPDU Discards
TLV Unknown
TLV Discards
Device Ageouts
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
Slot number for the module and physical port number on that module
(e.g., 3/1 specifies port 1 on slot 3).
The slot number for a specific module.
LLDPDU
Rx
Errors
0
0
50
0
50
0
Slot number for the module and physical port number on that module.
The total number of LLDPDUs transmitted on the port.
The total number of valid LLDPDUs received on the port.
The total number of invalid LLDPDUs discarded on the port.
The total number of LLDPDUs discarded on the port.
The total number of unrecognized LLDP TLVs on the port.
The total number of LLDP TLVs discarded on the port.
The total number of complete age-outs on the port.
March 2011
|
TLV
| Device
Discards |
Unknown
0
0
0
0
0
0
show lldp statistics
Discards | Ageouts
0
0
0
0
0
0
page 9-35