Linkagg Lacp Port Partner Admin-Port - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Link Aggregation Commands

linkagg lacp port partner admin-port

Configures the administrative status of a partner port.
linkagg lacp port slot/port[-port2] partner admin-port partner_admin_port
no linkagg lacp port slot/port[-port2] partner admin-port
Syntax Definitions
slot
port
-port2
partner_admin_port
Defaults
parameter
partner_admin_port
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to remove a partner_admin_port value from a slot and port
or a range of slot and ports associated with a dynamic aggregate group.
Examples
-> linkagg lacp port 2/1-5 partner admin-port 255
-> no linkagg lacp port 2/1-5 partner admin-port
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The slot number for this aggregate.
The port that the switch initially uses as the Spanning Tree virtual port
for this aggregate.
The last port number in a range of port IDs.
The administrative state of the partner port.
default
0
March 2011
linkagg lacp port partner admin-port
page 6-47