Link Aggregation Commands
linkagg lacp port actor system-priority
Configures the system priority of the port on the switch that belongs to the dynamic aggregate group.
linkagg lacp port slot/port[-port2] actor system-priority actor_system_priority
no linkagg lacp port slot/port[-port2] actor system-priority
Syntax Definitions
slot
port
-port2
actor_system_priority
Defaults
parameter
actor_system_priority
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove an actor system priority value from a slot and port or a
range of slot and ports associated with a dynamic aggregate group.
•
Configure the actor system-priority to a range of ports simultaneously. Use a hyphen to separate the
first and last port of a range after the port keyword.
Examples
-> linkagg lacp port 3/2-10 actor system-priority 65
-> no linkagg lacp port 3/2-10 actor system-priority
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The slot number for this aggregate.
The port that the switch initially uses as the Spanning Tree virtual port
for this aggregate.
The last port number in a range of port IDs.
The priority of the dynamic aggregate group.
default
0
March 2011
linkagg lacp port actor system-priority
page 6-35