Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 137

VLAN Management Commands
output definitions (continued)
ip
mtu
name
-> show vlan 1
Name
Type
Administrative State
Operational State
IP Router Port
IP MTU
output definitions
Name
Type
Administrative State
Operational State
IP Router Port
IP MTU
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
IP router interface status: Ena (IP interface exists for the VLAN) or Dis
(no IP router interface exists for the VLAN). Use the
command to define an IP router interface for a VLAN.
Maximum Transmission Unit: Size of largest data packet that the
VLAN port can transmit. Configured through the
mand.
The user-defined text description for the VLAN. By default, the VLAN
ID is displayed if the VLAN description is not specified. Configured
through the vlan command.
: Finance IP,
: Static Vlan,
: enabled,
: disabled,
: disabled,
: 1500
The user-defined text description for the VLAN. By default, the VLAN
ID is displayed if the VLAN description is not specified.
The type of VLAN (MTP Vlan, IPC Vlan, Standard Vlan, VIP
Vlan)
VLAN administrative status: enabled VLAN functions are enabled;
disabled specifies that VLAN functions are disabled. Use the
command to change the VLAN administrative status.
VLAN operational status: Ena (enabled) or Dis (disabled). The
operational status remains disabled until an active port is assigned to
the VLAN. When the operational status is enabled, then VLAN
properties (for example router interfaces, Spanning Tree) are applied to
ports and traffic flow.
IP router port status: Ena (IP interface exists for the VLAN) or Dis (no
IP router interface exists for the VLAN). Use the
command to define an IP router interface for a VLAN.
Maximum Transmission Unit: Size of largest data packet that the
VLAN port can transmit.
March 2011
show vlan
ip interface
vlan mtu-ip com-
vlan
ip interface
page 4-11