Linkagg Lacp Port Actor Port Priority - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Link Aggregation Commands

linkagg lacp port actor port priority

Configures the priority for an actor port.
linkagg lacp port slot/port[-port2] actor port-priority actor_port_priority
no linkagg lacp port slot/port[-port2] actor port-priority
Syntax Definitions
slot
port
-port2
actor_port_priority
Defaults
parameter
actor_port_priority
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to remove an actor_port_priority value from a slot and port
or a range of slot and ports associated with a dynamic aggregate group.
Examples
-> linkagg lacp port 2/1-5 actor port-priority 100
-> no linkagg lacp port 2/1-5 actor port-priority
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The slot number for this aggregate.
The port that the switch initially uses as the Spanning Tree virtual port
for this aggregate.
The last port number in a range of port IDs.
The priority of the actor port.
default
0
March 2011
linkagg lacp port actor port priority
page 6-45