Ethernet Port Commands
interfaces link-trap
Enables trap link messages. If enabled, a trap is generated whenever the port changes state.
interfaces [slot | slot/port [-port2]] link-trap {enable|disable}
Syntax Definitions
slot
port
port2
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> interfaces 3/1 link-trap enable
-> interfaces 3 link-trap enable
-> interfaces 3/1-6 link-trap enable
Release History
Release 7.1.1; command introduced.
Related Commands
show interfaces alias
MIB Objects
esmConfigTable
esmPortSlot
esmPortIF
OmniSwitch CLI Reference Guide
Slot number you want to configure.
Port number of the interface you want to configure.
Last port number in a range of ports you want to configure.
Port link up/down traps are displayed on the NMS.
Port link up/down traps are not displayed on the NMS.
default
disable
Displays interface line settings.
March 2011
interfaces link-trap
page 1-19