Chapter 9 802.1Ab Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

9 802.1AB Commands
802.1AB is an IEEE standard for exchanging information with neighboring devices and maintaining a
database of it. The information is exchanged as an LLDPDU (Link Layer Discovery Protocol Data Unit) in
TLV (Time, Length, Value) format. This chapter details configuring and monitoring 802.1AB on a switch.
Alcatel-Lucent's version of 802.1AB complies with the IEEE 802.1AB-2005 Station and Media Access
Control Discovery and ANSI-TIA 1057-2006 Link Layer Discovery Protocol for Media End Point
Devices.
MIB information for the 802.1AB commands is as follows:
Filename: IEEE_LLDP_Base.mib
Module: LLDP-MIB
Filename: IEEE_LLDP_Dot1.mib
Module: LLDP-EXT-DOT1-MIB
Filename: IEEE_LLDP_Dot3.mib
Module: LLDP-EXT-DOT3-MIB
A summary of available commands is listed here:
lldp transmit interval
lldp transmit hold-multiplier
lldp transmit delay
lldp reinit delay
lldp notification interval
lldp lldpdu
lldp notification
lldp tlv management
lldp tlv dot1
lldp tlv dot3
lldp tlv med
show lldp system-statistics
show lldp statistics
show lldp local -system
show lldp local -port
show lldp local-management-address
show lldp remote-system
show lldp remote-system med
Configuration procedures for 802.1AB are explained in "Configuring 802.1AB," OmniSwitch 10K
Network Configuration Guide.
OmniSwitch CLI Reference Guide March 2011 page 9-1