Lldp Lldpdu - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

802.1AB Commands

lldp lldpdu

Specifies the switch to control the transmission and the reception of LLDPDUs for a particular chassis, a
slot, or a port.
lldp {port slot/port [-port ]| slot slot | chassis} lldpdu {tx | rx | tx-and-rx | disable}
Syntax Definitions
slot/port
slot
chassis
tx
rx
tx-and-rx
disable
Defaults
parameter
tx | rx | tx-and-rx | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The port can be set to receive, transmit, or transmit and receive LLDPDUs using this command.
•
If this command is applied to a slot or chassis, then the existing configuration related to this command
is lost.
Examples
-> lldp port 1/2 lldpdu tx-and-rx
-> lldp slot 3 lldpdu tx
-> lldp chassis lldpdu disable
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
Slot number for the module and physical port number on that module
(e.g., 3/1 specifies port 1 on slot 3).
The slot number for a specific module.
Specifies the whole chassis.
Transmits LLDPDUs.
Receives LLDPDUs.
Transmits and receives LLDPDUs.
Disables LLDPDUs transmission and reception.
default
tx-and-rx
March 2011
lldp lldpdu
page 9-7