Linkagg Lacp Port Partner Admin System-Priority - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Link Aggregation Commands

linkagg lacp port partner admin system-priority

Configures the partner system priority for a dynamic aggregate group port.
linkagg lacp port slot/port[-port2] partner admin system-priority partner_admin_system_priority
no linkagg lacp port slot/port[-port2] partner admin system-priority
Syntax Definitions
slot
port
-port2
partner_admin_system_priority The priority of the dynamic aggregate group of the remote switch to
Defaults
parameter
partner_admin_system_priority 0
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to remove a partner_system_priority value from a slot and port
or a range of slot and ports associated with a dynamic aggregate group.
Examples
-> linkagg lacp port 2/1-5 partner admin system-priority 65
-> no linkagg lacp port 2/1-5 partner admin system-priority
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The slot number for this aggregate.
The port that the switch initially uses as the Spanning Tree virtual port
for this aggregate.
The last port number in a range of port IDs.
which the aggregation group is attached.
default
March 2011
linkagg lacp port partner admin system-priority
page 6-43