Linkagg Range - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Link Aggregation Commands

linkagg range

Modifies the range of standard and MC-LAG link aggregation identifiers.
linkagg range local {agg_num-agg_num | none} peer {agg_num-agg_num | none} multi-chassis
{agg_num-agg_num | none}
Syntax Definitions
agg_num
local
peer
multi-chassis
none
Defaults
parameter
local
peer
multi-chassis
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use this command in conjunction with the MC-LAG feature to change the maximum number of MC-
LAG link aggregates that can be configured.
•
The switch must be rebooted for the ranges to take affect.
•
The maximum number of combined standard and MC-LAG link aggregates is 128.
Examples
-> linkagg range local 0-9 peer 10-19 multi-chassis 20-127
-> linkagg range local none peer none multi-chassis 0-127
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The first or last identifier in the range.
The range of standard local aggregate identifiers.
The range of standard peer aggregate identifiers.
The range of MC-LAG aggregate identifiers.
No aggregate identifiers range is specified.
default
0-47
48-95
96-127
March 2011
linkagg range
page 6-51