Documentation Roadmap - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Documentation Roadmap

Documentation Roadmap
The OmniSwitch user documentation suite was designed to supply you with information at several critical
junctures of the configuration process.The following section outlines a roadmap of the manuals that will
help you at each stage of the configuration process. Under each stage, we point you to the manual or
manuals that will be most helpful to you.
Stage 1: Using the Switch for the First Time
Pertinent Documentation: OmniSwitch 10K Getting Started Guide
A hard-copy OmniSwitch 10K Getting Started Guide is included with your switch; this guide provides all
the information you need to get your switch up and running the first time. It provides information on
unpacking the switch, rack mounting the switch, installing NI modules, unlocking access control, setting
the switch's IP address, and setting up a password. It also includes succinct overview information on
fundamental aspects of the switch, such as hardware LEDs, the software directory structure, CLI
conventions, and web-based management.
At this time you should also familiarize yourself with the Release Notes that accompanied your switch.
This document includes important information on feature limitations that are not included in other user
guides.
Stage 2: Gaining Familiarity with Basic Switch Functions
Pertinent Documentation: OmniSwitch 10K Hardware Users Guide
Once you have your switch up and running, you will want to begin investigating basic aspects of its
hardware and software. Information about switch hardware is provided in the OmniSwitch 10K Hardware
Guide. This guide provide specifications, illustrations, and descriptions of all hardware components, such
as chassis, power supplies, Chassis Management Modules (CMMs), Network Interface (NI) modules, and
cooling fans. It also includes steps for common procedures, such as removing and installing switch
components.
This guide is the primary users guide for the basic software features on a single switch. This guide
contains information on the switch directory structure, basic file and directory utilities, switch access
security, SNMP, and web-based management. It is recommended that you read this guide before
connecting your switch to the network.
Stage 3: Integrating the Switch Into a Network
Pertinent Documentation: OmniSwitch AOS Release 7 Network Configuration Guide
When you are ready to connect your switch to the network, you will need to learn how the OmniSwitch
implements fundamental software features, such as 802.1Q, VLANs, Spanning Tree, and network routing
protocols. This guide contains overview information, procedures, and examples on how standard
networking technologies are configured on the OmniSwitch.
The guide includes configuration information for networks using advanced routing technologies (OSPF
and BGP) and multicast routing protocols (DVMRP and PIM-SM).
page -xxxii
Release Notes
OmniSwitch AOS Release 7 Switch Management Guide
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide
OmniSwitch CLI Reference Guide
About This Guide
March 2011