Show Spantree Msti Ports - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show spantree msti ports

show spantree msti ports
Displays Spanning Tree port information for a flat mode Multiple Spanning Tree Instance (MSTI).
show spantree msti [msti_id] ports [forwarding | blocking | active | configured]
Syntax Definitions
msti_id
forwarding
blocking
active
configured
Defaults
parameter
msti_id
forwarding | blocking | active |
configured
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If an msti_id number is not specified, this command displays the Spanning Tree port operational status,
path cost, and role values for all associated MSTIs.
•
This command displays Spanning Tree port information for an MSTI regardless of which mode (per-
VLAN or flat) is active on the switch.
•
Note that minimal information is displayed when this command is used in the per-VLAN mode, as
MSTIs are not active in this mode. In addition, if MSTP is not the selected flat mode protocol, this
command fails.
•
The configured keyword is only available when an instance number is specified with this command. In
addition, this keyword cannot be used in combination with either the forwarding or blocking
keywords.
•
Note that MSTI 0 also represents the CIST instance that is always present on the switch. To view the
CIST instance using this command, specify zero (0) for the msti_id number.
page 5-96
An existing MSTI ID number.
Displays Spanning Tree operational port parameters for ports that are
forwarding for the CIST instance.
Displays Spanning Tree operational port parameters for ports that are
blocked for the CIST instance.
Displays a list of active ports associated with the specified instance.
Displays Spanning Tree administrative port parameters for the CIST
instance.
default
all MSTIs
all ports
Distributed Spanning Tree Commands
OmniSwitch CLI Reference Guide March 2011