ip interface tunnel
ip interface tunnel
Configures the end points for a GRE or IPIP tunnel.
ip interface name tunnel [source ip_address] [destination ip_address] [protocol {ipip | gre}]
Syntax Definitions
name
source ip_address
destination ip_address
ipip
gre
Defaults
parameter
ipip | gre
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
You can configure an interface as either a VLAN or tunnel interface.
Examples
-> ip interface "tnl-1" tunnel source 23.23.23.1 destination 155.2.2.2 protocol gre
-> ip interface "tnl-1" tunnel source 23.23.23.1 destination 155.2.2.2 protocol
ipip
Release History
Release 7.1.1; command introduced
Related Commands
show ip interface
MIB Objects
alaIpInterfaceTable
alaIpInterfaceName
alaIpInterfaceTunnelSrc
page 10-8
Text string. Use quotes around string if description contains multiple
words with spaces between them (e.g. "Alcatel-Lucent Marketing").
Note that this value is case sensitive.
Source IP address of the tunnel.
Destination IP address of the tunnel.
Specifies the tunneling protocol as IPIP.
Specifies the tunneling protocol as GRE.
default
ipip
Displays the status and configuration of IP interfaces.
OmniSwitch CLI Reference Guide
IP Commands
March 2011