Ip Ospf Restart-Interval - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

OSPF Commands

ip ospf restart-interval

Configures the grace period for achieving a graceful OSPF restart.
ip ospf restart-interval [seconds]
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch 10K switches with a single CMM.
Example
-> ip ospf restart-interval 600
Release History
Release 7.1.1; command was introduced.
Related Commands
ip ospf restart-support
show ip ospf restart
MIB Objects
alaProtocolOspf
alaOspfRestartInterval
OmniSwitch CLI Reference Guide
The hitless restart timeout interval, in seconds. The valid range is
0–1800.
default
120
Administratively enables and disables support for the graceful
restart feature on an OSPF router.
Displays the OSPF graceful restart related configuration and status.
March 2011
ip ospf restart-interval
page 17-47