Show Interfaces Flood-Rate - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show interfaces flood-rate

show interfaces flood-rate
Displays interface peak flood rate settings.
show interfaces [slot | slot/port[-port2]] flood-rate
Syntax Definitions
slot
port
port2
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
N/A
Examples
-> show interfaces flood-rate
Slot/ Bcast
Port Value
-----+----------+-----+-------+----------+-----+-------+----------+-----+--------
1/1 496
1/2 496
1/3 496
1/4 496
1/5 496
output definitions
Slot/Port
Value
Type
Status
Release History
Release 7.1.1; command introduced.
page 1-40
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Bcast Bcast Ucast
Type Status Value
mbps enable
mbps enable
mbps enable
mbps enable
mbps enable
Interface slot and port numbers.
The value set based on the type of flood limiting.
The type of flood limiting: mbps, pps, or %
Status of the type of flood-limiting: enbaled or disabled.
Ucast Ucast
Type Status
496 mbps enable
496 mbps enable
496 mbps enable
496 mbps enable
496 mbps enable
OmniSwitch CLI Reference Guide
Ethernet Port Commands
Mcast Mcast Mcast
Value Type Status
496 mbps disable
496 mbps disable
496 mbps disable
496 mbps disable
496 mbps disable
March 2011