Psa-Mmb Communication Lan Setting Command (Setpsalan) - Fujitsu PRIMEQUEST 1000 Series User Manual

SVmco User Guide
Execution example
# iptables -X MMLAN
3.8 PSA-MMB Communication LAN Setting
Command (setpsalan)
The setpsalan command sets the PSA-MMB communication LAN.
You need to execute this command after installing SVmco. Before executing this
command, restart the operating system.
Executing this command sets the PSA-MMB communication LAN as follows.

IP address
172.30.0.<partition ID + 2>/24
Example) When the partition ID is 2
172.30.0.4/24

Communication settings
Auto Negotiation: off
Speed: 100 Mbps
Duplex: full
Remarks
131