Fujitsu PRIMEQUEST 1000 Series User Manual page 80

1500 vmnic0
PortGroup Name VLAN ID Used Ports Uplinks
VM Network
Service Console 0
\: This indicates that there is no line feed.
The above example shows that Service Console exists in vSwitch0, and the
physical adapter is vmnic0.
3. Disconnect the physical adapter from vSwitch0, and then connect the
physical adapter vmnic1, which is used for the management LAN, to
vSwitch0.
Execute the esxcfg-vswitch command to disconnect the physical adapter
vmnic0 from vSwitch0.
# esxcfg-vswitch -U vmnic0 vSwitch0
# esxcfg-vswitch -l
Switch Name Num Ports Used Ports Configured Ports \
MTU Uplinks
vSwitch0 64
1500
0 0 vmnic0
1 vmnic0
2 64 \
SVmco User Guidel
72