Fujitsu PRIMEQUEST 1000 Series User Manual page 199

SVmco User Guide
1. Click the [Cancel] button to return to the [Target Properties]
window shown in step 5.
2. Click the [Cancel] button again to return to the [iSCSI Initiator
Properties] window shown in step 4.
3. Select the next target, and repeat the steps after step 4.
If an IP address matches, click the [Cancel] button to return to the [Target
Properties] window shown in step 5, and proceed to step 8.
8. Click the [Devices] tab in the [Target Properties] window, and click the
[Advanced] button.
191