Fujitsu PRIMEQUEST 1000 Series User Manual page 108

SVmco User Guidel
Check the hardware environment. Execute the command again.
If the problem persists even after you execute the command again, collect the
necessary maintenance information, contact your sales representative or a field
engineer.
SVmco : W 02182 diskctrl Cannot get device information(WMI)
Meaning:
Device information could not be retrieved from WMI.
Corrective action:
Check the hardware environment. Execute the command again.
If the problem persists even after you execute the command again, collect the
necessary maintenance information, contact your sales representative or a field
engineer.
SVmco : W 02187 diskctrl internal error
Meaning:
An internal error occurred.
Corrective action:
A failure of this command or the system may have occurred.
Collect the necessary maintenance information, contact your sales
representative or a field engineer.
SVmco : W 02189 diskctrl Target Device is not connected
100