Fujitsu PRIMEQUEST 1000 Series User Manual page 349

SVmco User Guide
e1000:xxxx:xx:xx.x Adapter error (writel: PCI master abort error) vendor-
id=8086 device-id=%d revision=%r
Meaning:
A PCI master abort error occurred during a write operation on a register.
%d: (Example) 1209
%r: Numerical value (1 to 3 digits)
Corrective action:
A hardware error occurred. An adapter or IOB failure may have occurred. First,
replace the adapter. If the problem recurs, replace the IOB.
Severity:
Warning
Action:
(R/M/T/S)
11243
e1000: ethx Software error (e1000_set_multi:memory allocation failed)
Meaning:
Memory allocation for the multicast address table failed.
Corrective action:
Check the validity of the system memory estimate. If the memory estimate
seems reasonable, try restarting the system. If the problem persists even after a
system restart, collect the data for investigation (dump or log), and contact your
sales representative or a field engineer.
341