Fujitsu PRIMEQUEST 1000 Series User Manual page 539

SVmco User Guide
13142
mptscsih:iocx Adapter error (Skipping because SCSI Initiator mode is NOT
enabled) vendor-id=1000 device-id=%d revision=%r
Meaning: The IOC is not in initiator mode.
%d: (Example) 0030
%r: Numerical value (1 to 3 digits)
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales
representative or a field engineer.
Severity:
Warning
Action:
(R/M/T/S)
13143
mptscsih:iocx Software error (Unable to register controller with SCSI
subsystem)
Meaning:
A controller cannot be registered.
Corrective action:
A driver or kernel may have a fault. If the error keeps recurring, contact your
sales representative or a field engineer.
Severity:
531