SVmco User Guide
A hang was detected in the transmission unit.
%d: (Example) 1209
%r: Numerical value (1 to 3 digits)
Corrective action:
After this message was output, if communication is normal, no action is
necessary.
Alternatively, after this message was output, if communication becomes
abnormal, restart (reset) the adapter or restart the system. If normal operation
cannot be restored even after a system restart, replace the adapter.
Severity:
Warning
Action:
( / /T/S)
11610
e1000e:ethx Adapter error (pattern test reg failed) vendor-id=8086 device-
id=%d revision=%r
Meaning:
The pattern test failed.
%d: device id (e.g., 1209)
%r: Numerical value (1 to 3 digits)
Corrective action:
An adapter failure may have occurred. Replace the adapter.
349