Fujitsu PRIMEQUEST 1000 Series User Manual page 778

21709
e1000_express:%2 Adapter error (Could not establish link) vendor-id=8086
device-id=%d revision=%r
Meaning:
A link cannot be established.
%2: Device name
%d: (Example) 1209
%r: Numerical value (1 to 3 digits)
Corrective action:

If the unit name is IOB#n-PCIC#n-FUNC#n or PCI_Box#n-PCIC#n-
FUNC#n:
>> Check the cable.

If the unit name is GSPB#n-GbE#n or SB#n-NIC:
>> Remove and reinsert the GSPB or SB. Then, confirm that the board is
correctly mounted. If the same message appears, replace the GSPB or SB.
Severity:
Warning:
Action:
(R/M/T/S)
21710
SVmco User Guidel
770