SVmco User Guide
Hot maintenance of hard disks is disabled. The partition must be
stopped for maintenance.
PRIMECLUSTER linkage is disabled.
Remarks
SVIM installs
SVIM, see
the ServerView Suite ServerView Installation
For details on how to manually install SVmco, see
Installation and
The following table lists settings for SVmco operation. The installer
automatically adds or updates these settings during SVmco installation.
Settings automatically added/changed during SVmco installation
Target
snmpd.conf file
snmptrapd.conf file
snmptrapd start option
snmpd start option
Dedicated PSA-to-
MMB communication
LAN interface
iptables setting
SELinux configuration
as it installs the operating system. For details on
SVmco
Uninstallation.
Action
Add setting
Add setting
Change
Change
Set IP
address
Add setting
Change
Manager.
6. Manual SVmco
Remarks
Referring to
2.1.1
Configuring the
PSA-to-MMB
communication
LAN, change
settings as needed.
If SELinux is
disabled, do not
7