Fujitsu PRIMEQUEST 1000 Series User Manual page 52


The partition ID changes because a disk installed in a partition was
moved to another partition.

You are configuring a Windows cluster (MSCS) with partitions assigned
the same number, with the cluster spanning cabinets. (The same IP
addresses are assigned, so a configuration check detects an error
indicating that a duplicate IP address was found.)
Change the IP address setting by using the following procedure. If you are
changing the setting because of the above reason 1, you need to change the IP
addresses of all partitions in the cabinet and the IP address of the PSA-to-MMB
communication LAN on the MMB side to IP addresses in the same subnet.
Change the IP addresses on the MMB side from the MMB Web-UI.
Notes

Do not change the automatically set communication values. Otherwise,
PSA-MMB communication may be disabled, making SVmco functions
unavailable.

Change PSA-to-MMB LAN settings only after SVmco installation. If
changed before SVmco installation, the settings are overwritten by the
installation.

Configuring
communication LAN
Configure the network adapter by using the following procedure.

Operations
1. Select [Control Panel] - [Network Connections].
>> A window displays a list of networks.
the network adapter
SVmco User Guidel
for the PSA-to-MMB
44