Fujitsu PRIMEQUEST 1000 Series User Manual page 161

SVmco User Guide
10. In WebBIOS, create an array configuration.
11. Restore backup data or reinstall the operating system.
For the RAID 1, RAID 1E, RAID 5, RAID 6, or RAID 10 configuration (hot replacement)
Hot replacement is applicable to hard disks in the RAID 1, RAID 1E,
RAID 5, RAID 6, and RAID 10 configurations. The workflow is described
below.
1. Start ServerView RAID Manager.
2. In ServerView RAID Manager, confirm the mounting location by
selecting the hard disk that S.M.A.R.T. predicted to fail.
3. Check whether other hard disks are faulty. If a hard disk is faulty,
replace it.
4. Ensure consistency to make the hard disks error-free.
5. In the tree view, select the hard disk that S.M.A.R.T. predicted to fail.
Confirm that [Status] is [SMART Error].
153