Fujitsu PRIMEQUEST 1000 Series User Manual page 97

SVmco User Guide

c: Fault LED turn-off instruction
This option turns off the Fault LED that indicates the location of the SGPIO
controller specified in [iocx/slotno].
Remarks

How to specify the target in Linux
To operate an HDD, specify its logical device name or slot number for an
SGPIO controller. Before specifying a logical device name, confirm that it
exists in the operating system by using the status display (-l) option.
Devicename: Specify a logical device name in the operating
o
system.
Example: /dev/sda
iocx/slotno: Specify the IOC number of an SGPIO controller and
o
a disk slot number.
Example: ioc0/1 specifies slot 1 of ioc0.

How to specify the target in Windows
To operate an HDD, specify its logical device name or slot number for an
SGPIO controller. Before specifying a device, confirm that it exists by
using the status display (-l) option.
diskno: Specify a disk number (which appears in Disk
o
Administrator).
Example: 0 specifies Disk0.
\\device\scsiportno\slotno: Specify the SCSI number of an
o
SGPIO controller and a disk slot number.
Example: \\device\scsiport1\2 specifies slot 2 of SCSI number 1.
89