Fujitsu PRIMEQUEST 1000 Series User Manual page 616

SVmco User Guidel
An application error occurred. (Insufficient definition)
The default mode (number 0) was used because there is no parameter for the
specified mode.
Corrective action:
The settings for the driver are inadequate for use of the application. Confirm the
settings.
Severity:
Warning
Action:
( / /T/S)
14084
sd: Software error (Bad block number requested)
Meaning:
Usage is incorrect. The sector size for the device is 1024, 2048, or 4096, but the
start position or size of the request is not a multiple of the size.
Corrective action:
Fix the bug in the program in use.
Severity:
Warning
Action:
( / /T/S)
608