Fujitsu PRIMEQUEST 1000 Series User Manual page 39

SVmco User Guide
Make settings only as needed.
You can use duplicate disks from a partition in a single cabinet to configure a
new partition. To do so, you need to manually change EngineID of SNMPv3 for
internal SVmco communication.
Change EngineID by using the following procedure. Perform the procedure with
root privileges.

Operations
1. Execute the ps command to check whether SVmco is active.
Syntax
ps ax | grep mco
Example of output
If the command displays the processes in /opt/fujitsu/SVmco/bin/ as follows,
SVmco is running.
# ps ax | grep mco
4562 ? S 0:00 /opt/fujitsu/SVmco/bin/pm -o 70 /etc/opt/\
SVmco/global/pmmco.conf
4563 ? S 0:18 /opt/fujitsu/SVmco/bin/pcx -p /
4564 ? S 0:06 /opt/fujitsu/SVmco/bin/pcxipmi -p /
4565 ? S 0:00 /opt/fujitsu/SVmco/bin/mmbm -p /
4566 ? S 0:01 /opt/fujitsu/SVmco/bin/mmbs -p /
21670 pts/5 S+ 0:00 grep mco
31