Configuring The Firewall - Fujitsu PRIMEQUEST 1000 Series User Manual

SVmco User Guide
The configuration work is completed through the above steps.
In the above configuration example, the network is configured as follows:
Network configuration after setup

2.3.4 Configuring the firewall

This section describes how to configure the firewall for SVmco operation.
For SVmco, the following ports must be open.
Configuring the firewall for SVmco operation
No. Port
1 snmp port
3
psa-mmb
Port number Description
General snmp communication
udp/snmp or 161
port
MMB-PSA port
tcp/5000 on MMB
79