If the hard disk contains a swap device:
o
If the hard disk to be removed contains a partition specified as a
swap device, stop the system. Then, replace the hard disk.
2.
Take action as follows. The action depends on whether the hard disk to
be removed has the Mirror configuration in PRIMECLUSTER GDS.
If the hard disk to be removed has the Mirror configuration in
o
PRIMECLUSTER GDS:
From PRIMECLUSTER GDS, select the disk to be removed, and
remove it. For details on the removal procedure, see the
PRIMECLUSTER GDS manual.
If the hard disk to be removed does not have the Mirror
o
configuration in PRIMECLUSTER GDS:
Unmount all the disk partitions mounted on the disk to be removed.
# umount /dev/sdc1
# umount /dev/sdc2
Remarks
You need not unmount any partition operating as a raw or swap device.
However, the removal of devices requires changes to the raw and swap
device settings.
3.
Use the disk management command to stop the disk rotation.
Execute the disk management command to perform the following
processes.
.
.
.
SVmco User Guidel
140