Fujitsu PRIMEQUEST 1000 Series User Manual page 48

Item
5. WMI (Windows
Management
Instrumentation)
settings
Remarks
Description
The task varies depending on the parameter
selected on the [Security] tab in the [SNMP
Service Properties] window during SVmco
installation.

With [Accept SNMP packets from any
host] selected:
SNMP security is not configured.

With [Accept SNMP packets from these
hosts] selected: If neither the MMB IP
address nor localhost is specified, localhost
and SNMP security are configured.
SVmco uses WMI to acquire information on PCI
Express cards and SCSI devices. WMI is
installed as standard with Windows.
These settings include settings on the size of
memory and number of internal handles used by
WMI to collect this information. If the system has
many LUNs for devices such as RAIDs, it may
not have sufficient memory or internal handles.
For this reason, the settings are changed to the
following values:

Upper limit on memory used:
536,870,912 bytes (default of the operating
system)

Upper limit on internal handles: 65,536
SVmco User Guidel
40