Fujitsu PRIMEQUEST 1000 Series User Manual page 340

SVmco User Guidel
A hang was detected in the transmission unit.
Corrective action:
After this message was output, if communication is normal, no action is
necessary. Alternatively, after this message was output, if communication
becomes abnormal, restart (reset) the adapter or restart the system. If normal
operation cannot be restored even after a system restart, replace the adapter.
Severity:
Warning
Action:
( / /T/S)
11223
e1000:%i Adapter or Software error (Error in setting MWI)
Meaning:
Setting an MWI failed.
%i: ethx or xxxx:xx:xx.x
Corrective action:
Collect the data for investigation (dump or log). Contact your sales
representative or a field engineer.
Severity:
Warning
Action:
( / /T/S)
332