Fujitsu PRIMEQUEST 1000 Series User Manual page 96

the disk management command being executed before executing the
command.
(1) Syntax

In Linux
/opt/fujitsu/SVmco/bin/diskctrl {-l|-e|-i|-o|-c} {Devicename|
iocx/slotno}

In Windows
diskctrl {-l|-i|-o} {diskno| \\device\scsiportno\slotno}
(2) Options
{-l|-e|-i|-o|-c}

l: Status display
This option displays a list of HDDs recognized by the operating system.

e: Disk rotation stop instruction
This option stops the rotation of the HDD specified in [Devicename] or
[iocx/slotno]. Then, it turns on the Fault LED.

i: Location display
This option causes the Fault LED to blink to indicate the location of the
HDD specified in [Devicename], or the SGPIO controller specified in
[iocx/slotno].

o: Location turn-off
This option turns off the Fault LED that indicates the location of the HDD
specified in [Devicename] or the SGPIO controller specified in [iocx/slotno].
SVmco User Guidel
88