Fujitsu PRIMEQUEST 1000 Series User Manual page 755

SVmco User Guide
The Patrol Read mode or Auto Learn mode setting may be causing the problem.
Recheck the array controller settings.
Severity:
Error
Action:
(R/M/T/S)
18593
SV RAID:%2 Adapter error (SAS topology error) vendor-id=1000 device-
id=%d revision=%r
Meaning:
A SAS topology error occurred.
%2: Device name
%d: (Example) 0079
%r: Numerical value (1 to 3 digits)
Corrective action:
Power off the system. Then, confirm that the hard disk, SAS/SATA cable, power
supply, and other components are correctly connected. If the error recurs,
replace the relevant component on the SAS interface, such as the SAS/SATA
cable, expander, and backplane.
Severity:
Error
Action:
747