Fujitsu PRIMEQUEST 1000 Series User Manual page 820

Corrective action:
Take corrective action according to the messages that the multipath driver outputs and
the instructions in the ETERNUS Multipath Driver User's Guide.
Severity:
Warning
Action:
( / /T/S)
25001
MPD:\Device\ScsiPort%2 Adapter or FC-Network error (An input/output error has
occurred) vendor-id=10DF device-id=%d revision=%r
Meaning:
An I/O error was detected on \Device\ScsiPortP.
%2: Scsi number
%d: (Example) F980
%r: Numerical value (1 to 3 digits)
Corrective action:
Check the device indicated by \Device\ScsiPortP.
If the operating system is Windows Server 2003, identify the faulty part according to the
"Procedure for Identifying the Faulty Fibre Channel (FC) Adapter
Severity:
Error
SVmco User Guidel
Part."
812