Fujitsu PRIMEQUEST 1000 Series User Manual page 355

SVmco User Guide
e1000e:ethx Software error (Unable to allocate memory for the receive
descriptor ring)
Meaning:
Memory acquisition for the receive descriptor ring failed.
Corrective action:
Check the validity of the system memory estimate. If the memory estimate
seems reasonable, try restarting the system. If the problem persists even after a
system restart, collect the data for investigation (dump or log), and contact your
sales representative or a field engineer.
Severity:
Warning
Action:
( / /T/S)
11607
e1000e:ethx Software error (Unsupported Speed/Duplex configuration)
Meaning:
The specified communication speed or method is not supported.
Corrective action:
Recheck the communication speed and method settings for the adapter. Set the
correct values.
Severity:
Warning
347