Fujitsu PRIMEQUEST 1000 Series User Manual page 131

SVmco User Guide
(1) Syntax
For config_file, specify the file that contains the IP addresses of the
ports to open.
/opt/fujitsu/SVmco/sh/setmlanfw.sh {config_file}
(2) Options
None
(3) Usage example
For config_file, specify /tmp/config.txt, which contains the IP
addresses of the ports to open.
# /opt/fujitsu/SVmco/shsetmlanfw.sh /tmp/config.txt
(4) Output messages
The following messages appear for this CLI command.
Too few or more argument
Cannot read the file : %s
No IP setting or illegal IP format in /etc/fujitsu/SVmco/usr/ipsetup.conf
No IP setting in %s
123