Fujitsu PRIMEQUEST 1000 Series User Manual page 116


The user must have Administrator privileges to execute this command. If
an operating system function (access control function) is used to execute
the command with privileges other than Administrator privileges, the end
status is undefined.

The prerequisite for executing this command is that SVmco and SNMP
Service are running normally.

To replace a PCI card currently being used in the system, stop its use
and then disable it by using the Device Manager, before executing this
command.
The procedure for disabling a device by using the Device Manager is as
follows.
1. Start the Device Manager.
2. Right-click the device, and select [Disable].
(1) Syntax
>fjpciswap [-l|-r|-a] [UnitIdetificationName]
UnitIdetificationName (which specifies the identifier and slot location)
Specified names are case sensitive.
Example: IOB-PCIC#0, PCI_Box-PCIC#1, IOB#0-PCIC#1, PCI_Box#0-
PCIC#1
(2) Options
[-l|-r|-a]
-l: Display
This option displays a list of PCI cards that can be replaced using the
command. The following fields are displayed.
SVmco User Guidel
108