Fujitsu PRIMEQUEST 1000 Series User Manual page 443

SVmco User Guide
(R/M/T/S)
12090
lpfc:xxxx:xx:xx.x Adapter or Device or FC-Network error (invalid service
parameters) vendor-id=10DF device-id=%d revision=%r
Meaning:
An error (service parameter error) was detected on an FC interface.
%d: device id (e.g., F980)
%r: Numerical value (1 to 3 digits)
Corrective action:
Check the connection route (cable, switch, HBA, RAID port, etc.). If the error
keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
Action:
( / /T/S)
12091
lpfc:xxxx:xx:xx.x Adapter error (Adapter failed to set maximum DMA
length mbxStatus) vendor-id=10DF device-id=%d revision=%r
Meaning:
Adapter initialization failure.
435