Fujitsu PRIMEQUEST 1000 Series User Manual page 21

SVmco User Guide

Configuring the NIC of the PSA-to-MMB communication LAN
Configure the NIC of the PSA-to-MMB communication LAN by using the
following procedure.

Operations
1. Edit the ifcfg file of the corresponding interface in /etc/sysconfig/network-
scripts.
NIC interface file name for the PSA-to-MMB communication
o
LAN: ifcfg-<NIC interface name>
Example: ifcfg-eth0
Change the IP address by editing the ifcfg file of the interface.
The following example shows a command for editing the ifcfg file of
the NIC interface for the PSA-to-MMB communication LAN.
# vi /etc/sysconfig/network-scripts/ifcfg-<NIC interface
name>
Change the following lines:
BROADCAST=<BROADCAST address of PSA-to-MMB
communication LAN>
IPADDR=<IP address of PSA-to-MMB communication
LAN>
NETMASK=<Subnet mask of PSA-to-MMB
communication LAN>
13