Fujitsu PRIMEQUEST 1000 Series User Manual page 599

SVmco User Guide
6 (Unit Attention): This is notification information from various devices. (e.g.,
reset status, RAID degradation if applicable)
7 (Data Protect): Check the Write Protect status.
8 (Blank Check): Check tape and other operations.
b (Aborted Command): Investigate problems in the SCSI bus and FC
transmission paths.
If the problem persists, contact your sales representative or a field engineer.
Severity:
Warning
Action:
(R/M/T/S)
14055
scsi: Software error (cannot allocate scsi_result)
Meaning:
The memory in the kernel is insufficient.
Corrective action:
Add memory, or reduce the load.
Severity:
Warning
Action:
( / /T/S)
591