Network Information Settings For Converted L-Servers; Importing L-Servers; Releasing L-Servers; Setting Os With Deployment On Rhel-Kvm - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation Manual

c.
Importing the L-Server for which network information has been set
Refer to "7.2.3.2 Importing
-
Import L-Servers created in the ROR console into the L-Platform
Refer to "7.2.3.2 Importing

7.2.3.1 Network Information Settings for Converted L-Servers

Set the network information for the L-Servers converted in
Execute the rcxadm lserver attach -define command to set network information.
The setting of network information via the command rcxadm lserver attach -define can only be performed on the L-Server before it is
imported into the L-Platform management function.
Also, the rcxadm lserver attach -define command can only be executed if using Solaris Zone and OVM for SPARC.
If adding multiple network interface cards (NICs), execute the command rcxadm lserver attach -define only the same number of times as
there are NICs being added.
Refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE" for details.

7.2.3.2 Importing L-Servers

The Import L-Server command (cfmg_importlserver) can be used to import servers that have been deployed, or the VM guests that have
been imported using the ROR Console, to the L-Platform Management function.
Refer to "10.4 cfmg_importlserver (Import L-Server)" in the "Reference Guide (Command/XML) CE" for details on this command.
Note
-
When an L-Server for infrastructure administrator is imported to an L-Platform, the operation privileges of the L-Server are transferred
to the tenant administrator or the tenant user.
When this L-Server is released from the L-Platform by the cfmg_deletelserver command, the L-Server is changed back to the one for
infrastructure administrator.
-
L-Servers without network interface cards (NICs) cannot be imported.
-
No initial password information will be set for an L-Server that has been imported without image information being specified. "initial
password is [.]" will be displayed on the initial password confirmation window of the system details window of the L-Platform
management window.
-
An L-Server that is under a tenant cannot be imported to a different tenant.
-
When importing an L-Server that is not under a tenant, switch the power off for the L-Server targeted for import.
-
Do not import physical L-Servers that have VM hosts installed. Refer to "Appendix D Installing VM Hosts on Physical L-Servers"
in the "Setup Guide CE" for information on installing VM hosts on a physical L-Server.

7.2.3.3 Releasing L-Servers

L-Servers that have been imported into the L-Platform management function can be released from the L-Platform by using the L-Server
release command (cfmg_deletelserver).
Refer to "10.2 cfmg_deletelserver (Release L-Server)" in the "Reference Guide (Command/XML) CE" for more information about the
command.

7.2.4 Setting OS with Deployment on RHEL-KVM

OSs except Linux and Microsoft(R) Windows Server(R) 2008 R2
If the virtualization software is RHEL-KVM and the guest OS is neither Linux nor Windows Server(R) 2008 R2, it is necessary to manually
configure the IP address, default gateway, and host name of the guest OS. Users cannot access the deployed server until this configuration
L-Servers".
L-Servers".
"Use of Physical Servers or Virtual Machines as
- 16 -
L-Servers".