Fujitsu PRIMEQUEST 1000 Series User Manual page 136

Then, proceed to the next process.
Execution example Specifying the configuration file prepared in step 2
# /opt/fujitsu/SVmco/sh/setmlanfw.sh /tmp/config.txt
Management LAN IP address:
192.168.0.1
Source IPs for PRIMECLUSTER Service:
192.168.0.0/24
192.168.1.5
Press "Y" to confirm above settings, "N" to cancel all settings
> Y
The setting was completed
4. Execute the iptables -L -n command to confirm that the configuration
chain "MMLAN" exists.
Executing the setmlanfw.sh command creates the configuration chain
"MMLAN," which is referenced by the INPUT and OUTPUT chains.
Execution example
# iptables -L -n
Chain INPUT (policy DROP)
SVmco User Guidel
128